Metal Waste

?

2B BA ASTM INOX Hot Rolled Stainless Steel Coil with 914mm 1220mm 1524mm Width , 15mm Steel Coils

?

?

Descrition:

?

1. Items :Stainless steel coil ,Internal Core Dimensions (ID):< 1220mm wide = 508mm ID, > 1500mm wide = 610mm ID

2. Weight :allowance :Coils available in one (1) or two (2) ton (with allowance of +/- 10%), othersizes available on request.

3. Surface Finishes: 2B = cold rolled, softened and descaled, No. 4 = Polished 240 grit.

4. Widths:914mm / 1220mm / 1524mm etc.

5. Thickness:0.9mm through to 3.0mm

6. Grades:304/L and 316/L other finishes available on request.

7. Remark:nderstanding how nickel affects the price of stainless steel can be relayed .

?

?

Applications:

?

Stainless steel coil applications:

?

- - - -
Grade? | Description?and?General?Uses |
304 | The?most?widely?used?stainless?steel?with?the?best?all?round?performance.?Its?carbon content?is?lower?and?its?corrosion?after?welding?resistance?is?higher?than?T302.?It?is?less susceptible?to?intergranular?corrosion?after?welding.?Non?magnetic?but?slightly?magnetic when?cold?worked. |
304L | A?low?carbon?stainless?steel?with?general?corrosion?resistance?like?T304,?but?with superior?resistance?to?intergranular?corrosion?following?welding?or?stress?relieving. Highly?recommended?for?parts?which?are?fabricated?by?welding?and?which?can?not?be annealed.?Generally?limited?to?temperatures?up?to?426°C.?The?physical?properties?and thermal?treatments?of?T304L?are?similar?but?not?identical?to?T304.?Non?magnetic?when annealed?but?slightly?magnetic?when?cold?worked. |
316 | Also?known?as?Marine?grade?stainless?steel.?T316?has?2-3%?Molybdenum?which?improves corrosion?resistance.?T316?has?superior?corrosion?resistance?to?other?austenitic?steels when?exposed?to?many?types?of?chemical?corrodents?as?well?as?marine?environments -T316?also?has?applications?in?the?chemical,?textile,?and?paper?industries.?It?has?better strength?and?creep?resistance?at?high?temperatures?than?T304?and?greater?work hardening?properties.?Non?magnetic?but?slightly?magnetic?when?cold?worked. |
316L | Has?lower?carbon?than?T316,?with?corrosion?resistance?similar?to?T316?but?superior resistance?to?intergranular?corrosion?following?welding?or?stress?relieving.?It?is recommended?for?parts?which?cannot?be?subsequently?annealed.?Service?temperaturesup?to?426°C.? The?physical?properties?and?thermal?treatments?of?type?316L?are?similar?butnot?identical?to?type?316.? Non-magnetic?when?annealed?but?slightly?magnetic?when cold?worked. |
310s | 310S?has?been?developed?for?high?temperature?service?where?high?creep?strength?is required.?Max?service?temp?is?around?1100°C?but?it?is?not?recommended?for?applications of?prolonged?service?as?it?may?become?brittle.?Non?magnetic?when?annealed?or?cold worked. |
321 | Basically?302?(basic?18/8)?stabilised?by?the?addition?of?Tanium?to?five?times?the?carbon content.?This?prevents?intergranular?corrosion?and?offers?scale?resistance?at?higher temperatures?up?to?850°C.?Corrosion?resistance?is?lower?than?304.?Not?recommended for?bright/mirror?polishing.?Non-magnetic?when?annealed?but?slightly?magnetic?when cold?worked. |
904L | High?resistance?to?general?corrosion,?e.g?Sulphuric?and?acetic?acids,?crevice?corrosion, stress?corrosion,?pitting?in?chlorine?bearing?solutions.?Good?weldability. |
- - - -

?

?

Specifications:

?

Stainless steel Chemical Composition

?

??

- - - -
? | C | Si | Mn | P | S | Ni | Cr | Cu | Mo | N |
201 half Cu | 0.15Max | 1.0Max | 7.5-10.0 | 0.06Max | 0.03Max | 0.5-0.7 | 14.0-16.0 | 0.5-0.7 | ? | ? |
J4 | 0.10Max | 1.0Max | 7.5-10.0 | 0.06Max | 0.03Max | 0.8-1.0 | 14.0-16.0 | 1.4-1.6 | ? | ? |
201 | 0.10Max | 1.0Max | 7.5-10.0 | 0.06Max | 0.03Max | 1.0 | 16.0-18.0 | ? | ? | 0.25Max |
202 | 0.15Max | 1.0Max | 7.5-10.0 | 0.06Max | 0.03Max | 4.0 | 17.0-19.0 | ? | ? | 0.25Max |
301 | 0.15Max | 1.0Max | 2.0Max | 0.065Max | 0.03Max | 6.0 | 16.0-18.0 | ? | ? | ? |
304 | 0.07Max | 1.0Max | 2.0Max | 0.035Max | 0.03Max | 8.0 | 17.0-19.0 | ? | ? | ? |
304L | 0.03Max | 1.0Max | 2.0Max | 0.035Max | 0.03Max | 8.0 | 18.0-20.0 | ? | ? | ? |
316 | 0.08Max | 1.0Max | 2.0Max | 0.035Max | 0.03Max | 10.0 | 16.0-18.0 | ? | ? | ? |
316L | 0.03Max | 1.0Max | 2.0Max | 0.035Max | 0.03Max | 10.0 | 16.0-18.0 | ? | 2.0 | ? |
321 | 0.12Max | 1.0Max | 2.0Max | 0.035Max | 0.03Max | 9.0 | 17.0-19.0 | ? | ? | ? |
309S | 0.08Max | 1.0Max | 2.0Max | 0.035Max | 0.03Max | 12.0 | 22.0-24.0 | ? | ? | ? |
310S | 0.08Max | 1.0Max | 2.0Max | 0.035Max | 0.03Max | 19.0 | 24.0-26.0 | ? | ? | ? |
410 | 0.15Max | 1.0Max | 1.0Max | 0.035Max | 0.03Max | 0.06Max | 11.5-13.5 | ? | ? | ? |
410S | 0.08Max | 1.0Max | 1.0Max | 0.035Max | 0.03Max | 0.06Max | 11.5-13.5 | ? | ? | ? |
409 | 0.08Max | 1.0Max | 1.0Max | 0.040Max | 0.03Max | 0.06Max | 10.5-11.5 | ? | ? | ? |
409L | 0.03Max | 1.0Max | 1.0Max | 0.040Max | 0.03Max | 0.06Max | 10.5-11.5 | ? | ? | ? |
420J2 | 0.35Max | 1.0Max | 1.0Max | 0.040Max | 0.03Max | 0.06Max | 12.0-14.0 | ? | ? | ? |
430 | 0.12Max | 0.7Max | 1.0Max | 0.040Max | 0.03Max | 0.06Max | 16.0-18.0 | ? | 2.0 | ? |
- - - -

?

?

Competitive Advantage:

?

Our company is high quality supplier in China(mainland) with good reputation

To develop the foreign markets, we provide customers high-quality stainless steel products with competitive price as well as our Thoughtful after-sale service & Excellent experience and import-export,

If you want to know any other detailed information, please contact us .We welcome you to vist our factory and hope to do business with you.

?

?

Packing and shipping