Machinery & Equipment

Integrated Pressure Silver Fluorocarbon Plate Heat Pipe Solar Water Heater 24tubes for Flat Roof

?

- - - -
Description | Integrated Pressure Silver Fluorocarbon Plate Heat Pipe Solar Water Heater |
Material of out tank | 0.4mm thickness Silver Fluorocarbon Plate |
Material of inner tank | Food grade1.2mm thickness SUS304 stainless steel |
Tank insulating layer | 55mm 45kg/m3 high-density polyurethane foamed |
Max pressure | 0.6 Mpa |
Inlet and outlet hole | Male G 1/2,3/4 |
Solar collector tube | 3.3 Borosilicate glass with N/Al coating |
Thickness of glass tube | 1.6mm |
Vacuum tube tightness | P≤0.005 Pa |
Absorption | as=0.93-0.96 (AM1.5) |
Emission ratio | εh=0.04-0.06 (80C±5C) |
Idle sunning property parameters | Y=220~260m2.C/KW |
Average heat loss coefficient | ULT=0.6~0.7W/(m2.C) |
Bracket: | 1.2mm thickness?Aluminum alloy |
Structure of tank | 5 holes for air vent,water inlet and outlet, El. Heater and mag. rod |
Fastening pieces | Made of stainless steel screw |
Absorbed area | 2.26m2 |
Tube quantity | 58x1,800mmx24tube with heat pipe |
- - - -

?

Integrated Pressure Silver Fluorocarbon Plate Heat Pipe Solar Water Heater 24tubes for Flat Roof?working principle

?

1.The solar heater tank has no exhaust hole, therefore, it must bear the pressure came from tap water and hot water,when use, the hot water comes out because of water pressure.
2.Vacuum tube absorbs solar energy, and conductive copper pipe transfers the heat into the pressurized solar water heater tank. In this case, the water inside the tank becomes hot

3.No water in the heat pipe makes the whole system could bear pressure



?

Description

?

1) Inner tank material: SUS304-2B stainless steel. Available thickness is 1.2-1.5mm.
2) Outer tank material: Silver fluorocarbon (PVDF) plate 0.4MM
3) Heat pipe Vacuum tube: 58x1800mm
Material: High borosilicate glass, three-layer coated vacuum tube.
Over 15 years service life. Hail resistance: 25mm.
4) Insulation layer: High density polyurethane foam, available thickness is 50-60mm.
5) Very popular tank capacity in present markets is 150-300L.
6) Frame material: Aluminum alloy 1.2mm,?universal bracket suitable for slope and flat roof installation

?



?

Applications:

Domestic hot water for shower, washing

?

Competitive Advantage:

1. High efficiency, rapid water heating with INLIGHT heat pipe tubes.

2. INLIGHT three-target tube for heat pipe ensures no fall-off coat under high temperature;

3. Breaking or withdrawing one or several heat pipe tubes does not drain the solar system.

4. INLIGHT heat pipe tube is designed to work within temperature rage (-)40 oC ~ 300 oC;

5. Every of INLIGHT heat pipe have been tested before delivery to ensure no dead heat pipe;

6. The whole solar system is pressurized and works under high water pressure automatically.

7. INLIGHT water storage tank is designed to bear 100,000 times fatigue test without any damage.

8. T/P valve and safety valve works together to ensure no excess heat or pressure inside system;

9. The simple structure is designed for easy installation and pipeline connection;

10. INLIGHT aluminum alloy frame is designed for slope and flat roof installation;

11. Equipped with INLIGHT electric heater and solar controller the system is more intelligent;

12. Sample solar water heater is installed for every order to ensure no mistakes or missing parts for customers.