Industrial Lighting

24Tubes Slivery Aluminum Alloy Heat Pipe Solar Collector Install on Flat Roof

?

- - - -
Heat Pipe
Vacuum Tube | Size (mm) | Φ47×1500 , Φ58×1800 |
Tubes (pcs) | 12 / 15 / 18/ 20 / 24 /25/ 30 |
Material | Three-target vacuum tube, red copper heat pipe, aluminum fin |
Coating | Cu/SS-ALN(H)/SS-ALN(L)/ALN |
Aluminum Alloy Manifold | Flow passage | High-quality red copper Φ35*1.0mm |
Outer shell | Slivery Aluminum alloy plate 2mm |
Insulation | Processed high-density rockwool/ polyurethane |
Frame and Bracket | Slivery Aluminum alloy 1.8~2.0mm |
Accessories | Stainless bolts & nuts, dust-proof rubber seal, plastic tube holder |
Working Pressure | 2.0-7.0 bar |
Tilt Angle | 10°~ 80° (ensure the best heat efficiency for gravity heat pipe) |
Hail Resistance | ≤ Φ25mm diameter |
Anti-freezing | ≤ -40°C |
- - - -

?

?

Description:

The heat pipe solar collector consists of heat pipe glass vacuum tube, pressurized manifold, supporting bracket and other related accessories

1) Solar heat pipe and its inner medium for thermal conduction, with a quick start and super daily efficiency about 55% in summer and 42% in winter, much more than that of the all-glass tube

2) The flow passage is inner closed and pressurized, no water or medium goes through glass vacuum tubes, no freeze to break vacuum tubes, able to serve in extremely cold weather

3) Heat pipe tip is inserted into a closed cannula welded into the copper flow passage, collector works well even withdrawal one or several heat pipe vacuum tubes

4) Aluminum alloy as bracket with super performance in chemical resistance, universal bracket suitable for slope and flat roof installation

5) Modularized collector, arbitrary combination with any architectural structure, adaptable to either slope roof or flat ground or upright walls, almost maintenance free collector

?

?

?

?



?

24Tubes Slivery Aluminum Alloy Heat Pipe Solar Collector Install on Flat Roof??working principle

?

?

?

1. INLIGHT heat pipe solar collector is a kind of pressurized and efficient solar water heating device, heating flowing water or liquid in closed flow passage with heat pipes and pipe caps for heat transfer, since the copper flow passage is closed inside with pipe caps welded in it, water or liquid will never flow into heat pipe vacuum tubes.

?

2. INLIGHT heat pipe collector is composed of heat pipe tubes, pressurized manifold and supporting frame, and it is commonly used in active solar water heating system.

?

Applications:

Domestic hot water for shower, washing. Solar Thermal, Project: such as School, Hospital, Hotel.

?

Competitive Advantage:

1. It is the most efficient solar collector which is widely used in active hot water heating system, supplying hot water for domestic applications, dormitories, hotels, restaurants, schools, hospitals, factories, swimming pools, etc.

2. The flow passage is inner closed and pressurized, water or liquid will not flows into glass vacuum tubes, no freeze expansion or inner thermal shock to break vacuum tubes.

3. Heat pipe tip is inserted into a closed pipe cap welded into the copper flow passage, withdrawal or breaking one or several heat pipe tubes will not drain the collector loop.

4. Aluminum alloy as manifold shell and frame makes the collector superior in chemical resistance, universal frame suitable for slope and flat roof installation.

5. Modularized collector, arbitrary combination with any architectural structure, adaptable to slope roof or flat ground or upright walls, maintenance free collector

6. The collector can be used in -40oC weather with anti-freezing heat pipe.

7. System efficiency: >55% in summer and >42% in winter

?