Machinery & Industrial Supplies

160KW Super Audio Frequency Induction Forging Machine for Connecting RodContents:160KW super audio frequency induction forging machine for connecting rod has 100% 0f efficiency and 100% of continuous load rate. Its maximum output power is 160kw while its maximum input current is 220A. And its temperature protection is 28℃.Because of its specification, this induction forging machine has many advantages. This machine uses IGBT as the core component, full-bridge inverter and a series resonant circuit. And it has the design of 100% continuous load rate, which can work continuously for 24 hours, turning on or off immediately. The induction forging machine has replaced the heating oxy-acetylene flame, coke furnace, salt bath furnace, gas furnace, oil furnace, etc.Specification:ModelWH-VI-160Working ?Voltage Range342V-430VMax. ?Input Current220AOscillation ?frequency10-35KHZEfficiency100%Continuous ?load rate100%Cooling ?Water Flow (host)29L/min(0.3mpa)Cooling ?Water Flow (transformer)22L/min(0.3mpa)Work ?Power380V/50~60HZCooling ?Water Pressure0.1-0.3mpaHost ?Weight85kg±5%Transformer ?Weight90kg±5%Host ?Size(mm)650×520×1100Transformer ?Size (mm)500×800×580ColorBlue/WhiteTemperature ?Protection28℃Use and Operation:1. Install a suitable induction coil according to the work piece.2. Turn on the cooling water, check the water flow and pressure to ensure that they meet the required range.3. Put through power supply, and different models should be put through the corresponding power supply.4. Open the front panel of the machine, and the control power is put through.5. Place the work piece into induction circle and open pedal switch for heating the work piece.6. Adjust the power adjustment knob, so that the heating rate to process requirements.7. Disconnect the pedal switch after heating, and remove the work piece.8. After completed, heating is stopped, close the host& acute;s power switch.9. Turn off the chiller after 10 minutes.Package:1. On the outside, packing fumigation wooden cas