Machinery & Equipment

WDW-Y15 Electronic Compression Testing Machine
1. Model: WDW-Y15
2. Product name: electronic compression testing machine
3. Introduction and application of testing machine
The machine is mainly used to test the properties of iron ore by the application of a compressive load to a single iron ore pellet at a specified speed of the compressive platen until the pellet is broken.

4. Definition
Crushing strength: the applied maximum compressive load at which an iron ore pellet is broken completely, and which is expressed as the mean value of all measurements of test sample.

5. Taking of sample
The test sample (test pieces) for determining the crushing strength shall by obtained at random, for example by the use of a random selection plate, on about 1kg of the sample for physical testing. The test sample shall be oven dried at 105±5℃ and cooled to room temperature before testing.

6. Number of test pieces (iron ore pellets)
Sixty or more test pieces, or as agreed upon between the interested parties, shall be tested for each sample.

7. Test procedure
Place a test piece (single pellet) at the approximate centre of the surface-hardened portion of the lower platen. Apply the load at a constant rate between 10 and 20mm/min throughout the test period.

Record the maximum load, at which the test piece undergoes complete breakage, to at least one decimal place, in decanewtons.

Note: complete breakage is ensured by continuing to apply the load until the platen gap has closed to 50% of the average test piece size.

Clean the platens thoroughly before the next test piece(single pellet) is tested.

Repeat the procedure on the remaining test pieces.

8. Main technical parameters of testing machine
1 Max test force 15KN
2 Measuring range 200N-15KN
3 Precision 1%
4 Resolution of displacement 0.01mm
5 Speed range of displacement 0.2-500mm/min
6 Compression space 400mm
7 Effective width 360mm
8 Voltage and power 220V, 50Hz, 750W
9 Dimension of main machine 740X350X1600mm