Batteries & Chargers

1.25Gbps Precision Fiber Optic Transceiver Module , Cisco Compatible SFP Transceiver

?

?

Descriptions:?
# 1.25Gbps SFP optical transceiver with DDMI (OP-MP413L1SD-40)
# Hot-pluggable, duplex LC, +3.3V
# 1,310nm, DFB, single-mode

?

Features:
# Compliant with specifications for IEEE802.3Z
# Multi-source package with duplex LC connector
# Eye safety designed to meet laser class 1, compliant with IEC60825
# Up to 1.25Gbps data links
# Single +3.3V power supply
# Hot-pluggable
# Monitoring interface compliant with SFF-8472
# Compliant with Bellcore TA-NWT-000983
# Compliant with RoHS Directive

?

Applications:
# Gigabit Ethernet
# 1 x fiber channels
# Switch to switch interface
# Switched backplane applications
# Router/server interface
# Other optical links

?

Specification:

?

Electrical and Optical Characteristics: (Condition: Ta=TOP)

?

- - - -
Parameter | Symbol | Min. | Typical | Max. | Unit |
Transmitter Differential Input Volt | +/-TX_DAT | 200 | ? | 2400 | mV p-p |
Supply Current | ICC | ? | 130 | 180 | mA |
Tx_Disable Input Voltage – Low | VIL | 0 | ? | 0.8 | V |
Tx_Disable Input Voltage – High | VIH | 2.0 | ? | Vcc | V |
Tx_Fault Output Voltage – Low | VOL | 0 | ? | 0.8 | V |
Tx_Fault Output Voltage – High | VOH | 2.0 | ? | Vcc | V |
Receiver Differential Output Volt | +/-RX_DAT | 600 | ? | 1400 | mV p-p |
Rx_LOS Output Voltage- Low | VOL | 0 | ? | 0.8 | V |
Rx_LOS Output Voltage- High | VOH | 2.0 | ? | Vcc | V |
- - - -

?

Transmitter

?

- - - -
Parameter | Symbol | Min. | Typical | Max. | Unit |
Data Rate | B | - | 1250 | - | Mb/s |
Output Center Wavelength | λC | 1480 | 1550 | 1580 | nm |
Output Spectral Width | △λ | - | - | 1 | nm |
Average Output Power | Po | -5 | - | 0 | dBm |
Extinction Ratio | E.R. | 10 | - | - | dB |
Data Input Voltage-High | VIHS | Vcc-1.16 | - | Vcc-0.89 | V |
- - - -

- - - -
Data Input Voltage -Low | VILS | Vcc-1.82 | - | Vcc-1.48 | V |
Supply Current | ICC | - | 90 | 130 | mA |
Output Optical Eye | Compliant with IEEE802.3Z |
Receiver |
Parameter | Symbol | Min. | Typical | Max. | Unit |
Receive Sensitivity | Pmin | - | - | -23 | dBm |
Maximum Input Power | PMAX | -3 | 0 | - | dBm |
Threshold-Assertion: | SDHIGH | - | - | -25 | dBm |
Signal Detect Threshold-Deassertion: | SDLOW | -35 | - | - | dBm |
Hysteresis | - | - | 2.0 | - | dBm |
Output High Voltage | VOH | Vcc-1.03 | - | Vcc-0.89 | V |
Output Low Voltage | VOL | Vcc-1.82 | - | Vcc-1.63 | V |
Operating Wavelength | λc | 1100 | - | 1600 | nm |
Supply Current | ICC | - | 80 | 110 | mA |
- - - -

?

?

Absolute Maximum Ratings: (TC=25℃)

?

- - - -
Parameter | Symbol | Min. | Max. | Unit |
Storage Temperature | TST | -40 | +85 | ℃ |
Operating Temperature | TIP | 0 | +70 | ℃ |
Input Voltage | TCC | 0 | +5 | V |
- - - -

?

Recommended Operating Environment:

?

- - - -
Parameter | Symbol | Min. | Typical | Max. | Unit |
Supply Voltage | VCC | +3.0 | +3.3 | +3.6 | V |
Operating Temperature | TOP | 0 | - | +70 | ℃ |
- - - -

?

Timing Characteristics:

?

- - - -
Parameter | Symbol | Min. | Typical | Max. | Unit |
TX_DISABLE Assert Time | t_off | ? | 3 | 10 | usec |
TX_DISABLE Negate Time | t_on | ? | 0.5 | 1 | msec |
Time to initialize include reset of TX_FAULT | t_int | ? | 30 | 300 | msec |
TX_FAULT from fault to assertion | t_fault | ? | 20 | 100 | usec |
TX_DISBEL time to start reset | t_reset | 10 | ? | ? | usec |
Receiver Loss of Signal Assert Time (off to On) | TA,RX_LOS | ? | ? | 100 | usec |
Receiver Loss of Signal Assert Time (on to off) | Td,RX_LOS | ? | ? | 100 | usec |
- - - -

?

Serial ID Memory Contents:? ?

?

- - - -
Data Address | Length (Byte) | Name of Length | ? Description and Contents |
Base ID Fields |
0 | 1 | Identifier | Type of Serial transceiver (03h=SFP) |
1 | 1 | Reserved | Extended identifier of type serial transceiver (04h) |
2 | 1 | Connector | Code of optical connector type (07=LC) |
3-10 | 8 | Transceiver | Gigabit Ethernet 1000Base-SX & Fiber Channel |
11 | 1 | Encoding | 8B10B (01h) |
12 | 1 | BR,Nominal | Nominal baud rate, unit of 100Mbps |
13-14 | 2 | Reserved | (0000h) |
15 | 1 | Length(9um) | Link length supported for 9/125um fiber, units of 100m |
16 | 1 | Length(50um) | Link length supported for 50/125um fiber, units of 10m |
17 | 1 | Length(62.5um) | Link length supported for 62.5/125um fiber, units of 10m |
18 | 1 | Length(Copper) | Link length supported for copper, units of meters |
19 | 1 | Reserved | ? |
20-35 | 16 | Vendor Name | SFP vendor name: OP |
36 | 1 | Reserved | ? |
37-39 | 3 | Vendor OUI | SFP transceiver vendor OUI ID |
- - - -

- - - -
40-55 | 16 | Vendor PN | Part Number: “OP-xxxxxx” (ASCII) |
56-59 | 4 | Vendor rev | Revision level for part number |
60-62 | 3 | Reserved | ? |
63 | 1 | CCID | Least significant byte of sum of data in address 0-62 |
Extended ID Fields |
? 64-65 | ? 2 | ? Option | Indicates which optical SFP signals are implemented (001Ah = LOS, TX_FAULT, TX_DISABLE all supported) |
66 | 1 | BR, max | Upper bit rate margin, units of % |
67 | 1 | BR, min | Lower bit rate margin, units of % |
68-83 | 16 | Vendor SN | Serial number (ASCII) |
84-91 | 8 | Date code | OP’s Manufacturing date code |
92-94 | 3 | Reserved | ? |
95 | 1 | CCEX | Check code for the extended ID Fields (addresses 64 to 94) |
Vendor Specific ID Fields |
96-127 | 32 | Readable | OP specific date, read only |
- - - -

?

?

?

Mechanical Dimensions:

?

? ? ??? ? ? ?

?

?

? ? ? ? ??

?

?

? ? ? ? ?

?

?

? ? ? ? ?

?

Company Profile:

?
Shenzhen Optostar Optoelectronics Co., Ltd. was founded in May 2006 and headquartered in Nanshan District, Shenzhen, China. As a leading manufacturer and supplier for fiber optical components and system products in China, we can provide our customers with active components such as GPON/EPON, all serial SFP transceivers, Media Converters, PDH multiplexers, EDFAs, Video Multiplexers which are used for telecommunication, network and security. We are also producing passive components such as Patch Cords, CWDM, DWDM, PLC splitters and so on.

Our company has a lot of advantages based on 10 years of experience in the optical telecommunication industry: Perfect techniques and producing plant, Abundant technology development capability with 10 persons R&D team, Rich OEM & ODM co-operation experience with famous overseas companies, Strong ability to provide whole network solutions. We owned 2 production plants which the total area is more than 6000sqm and more than 300 workers and 50 technicians and 1 headquarter office which has sales team of around 30 persons. After more than ten years of operation, Optostar has successfully developed the worldwide market. Our products are widely accepted by the customer from all of the world and win good reputations by themselves. We promise to provide our customers with high quality products and nice services. To achieve your 100% satisfaction is our persistent goal all along!