Electronics Production Machinery

?

100A 200A 15-24KV Porcelain Dropout Fuse Cutout High Voltage Fuse

?

1. Efficient Current Transfer The cutout has an all copper single piece current path with Silver-plated contacts.

?

2. Terminals are tin-plated brass for use with copper or aluminum conductor.


3. Hooks Galvanized steel hooks are standard on all cutouts, for use with a portable tool. The hooks are mounted under the top contact and serve as a guide for the fuse holder when closing at an off centre angle.

?

4. Top ContactThe top contact is designed such that it provides a smooth self aligning action during closing; the top contact is formed from highly conductive copper and is silver-plated, which provides a continuous current path from dome nut to PG clamp.

?

5. The contact is designed to maintain firm and constant pressure with the fuse holder contact surface until fault interruption is accomplished. Backing the top contact is the Loadbreak bracket, which prevents over-racking. Used in conjunction with a load break tool of the correct rating, the cutout can be opened under load.

?

?

Specifications:

?

- - - -
Type | Rated Voltage ? ?(kV) | Rated Current ?(A) | Breaking Current ? (A) | Impulse Voltage ? (kV) | Power-frequeny withsand voltage (kV) | Creepage Distance (mm) | Weight ? (kg) | Dimension (cm) |
YXC1-15/100 ? | 15-24 ? | 100 ? | 8000 ? | 125 ? | 45 ? | 350 ? | 6.8 ? | 50*36*10.5 ? |
YXC1-15/200 ? | 15-24 ? | 200 ? | 10000 ? | 125 ? | 45 ? | 350 ? | 7.2 ? | 50*36*10.5 ? |
- - - -

?

?

Service Conditions:

?

1. Environment temperature: ?-40oC~ +40oC

2. ?Relative humidity: ?Daily average value not more than 95%, on average less than 90%

3. ?The location of on more than 1000m altitude (high altitude type not more than 3000m)

4. ?Wind speed not more than 34m/s

5. ?Ice cover thickness not more than 20mm

6. ?Installation site should be no fire and explosion danger, chemical corrosion and violent cibration.

?

?

FAQ:

?

A. Would you accept OEM/ODM service?

?

Glad to say that there is planning department, technical department and mould tooling center in

our factory. For the OEM & ODM, it is ok for us if your brand, market shares are great.

?

B. How& acute;s the delivery time?


Depend on your quantity, usually within 15days after receiving deposit

?

C. What& acute;s your payment term?

?

T/T, L/C; other terms is negotiable after further check

?

?

D. What& acute;s your guaranty time?

?

1 year, Any faulty items caused by Yixin?will be replaced freely

?

?

?

?