Phone & Sim Cards

PoE(PSE) 10/100/1000Base-TX to 1000Base-X SFP Media Converter
?
Model: LNK-POE1000SFP Series
Overview

LNK-POE1000SFP series is a 10/100/1000Base-TX to 1000Base-X SFP (also can be forced to 100Base-FX) media converter, which allows two types of network segment to be connected easily. Complied with IEEE802.3at or IEEE802.3af standard, the AC/DC powered PoE media converter is a Power Sourcing Equipment (PSE) which combines data transfered over a fiber optic link with 48V (or other voltage) power supply, providing power to IEEE802.3at or IEEE802.3af powered device (PD) over CAT5e/CAT6 UTP cable (cable length up to 100meters / 330feets). The converter includes a single port PSE controller, which offers PD signature sensing and power monitoring features. Other features include over-current protection, LFP function, etc. The LFP (Link Fault Pass-through) allows the media converter to monitor both the fiber and copper RX port for loss of signal. In case of a loss of RX signal on one media port, the converter will automatically disable the TX signal to the other media port, thus passing through the link fault.

Features

· 10/100/1000Base-TX UTP to 1000Base-X SFP fiber media conversion

· IEEE802.3at / IEEE802.3af PoE PSE compatible

· Built-in AC/DC power supply

· Over-current protection

· Supports external 1000Base-X SFP

· DIP switch to set different configurations

· LFP (Link Fault Pass-through) support

?

Technical Indexes

- - - -
Data Rates | 10/100/1000Mbps(IEEE802.3U IEEE802.3z 1000Base-Tx) |
1000Mbps (1000Base-FX) or 100Mbps (100Base-FX) |
Input Power Requirements |
Input voltage | 100 VAC to 240 VAC |
Input frequency | 47 Hz to 63 Hz |
Power over Ethernet Output |
Pin Assignment and Polarity | ? |
For IEEE802.3af standard | 1/2 (V+),3/6 (V-) |
For IEEE802.3at standard (30watts maximum) | 1/2 (V+),3/6 (V-) |
For IEEE802.3at standard (50watts maximum) | 1/2/4/5 (V+),3/6/7/8 (V-) |
Output Power | please refer to ordering information |
Efficiency | 75% min |
Short circuit protection | auto recovery |
Over current protection | auto recovery |
Environmental Conditions |
Operating temperature | 0℃ to 50℃ |
Cooling | free air convection |
Storage temperature | -20℃ to +85℃ |
Operating Humidity | 90% max, non-condensing |
Mechanical Specifications |
Case Material | Iron |
Case Color | Black |
Net Weight | 560g approx. / unit |
Dimensions | 110(W) x 40(H) x 140(L) (mm) |
Do not include transceiver length |
Connectors |
AC Inlet | IEC-J-4 |
LAN | Shielded RJ-45 |
Fiber | see ordering information |
- - - -

*Specifications subject to change without notice.

?

Ordering Information:

- - - -
Part Number | Supported Standard | Output Voltage | Output Current | Output Power | Remark |
LNK-POE1000S-XX-XXX | IEEE 802.3af | 48V | 0.35A max | 15.4W max | default |
LNK-POE1000-XX-XXX | IEEE 802.3af | 48V | 0.54A max | 25W max | default |
LNK-POE1000T-XX-XXX | IEEE 802.3at | 52V | 0.60A max | 30W max | default |
LNK-POE1000H-XX-XXX | IEEE 802.3at | 52V | 1.00A max | 50W max | default |
LNK-POE1000B-XX-XXX | Non-standard | 48V | 0.60A max | 30W max | optional |
LNK-POE1000C-XX-XXX | Non-standard | 24V | 1.20A max | 30W max | optional |
- - - -

*XX-XXX: supports optic connector / fiber type and distance. For more details, please refer to the list below or contact us.

- - - -
Suffix | Description | Suffix | Description |
SFP-M005 | LC/SFP, Multi-Mode, 550m , 850nm | SFP-S20 | LC/SFP, Single-Mode, 20km , 1310nm |
SFP-S10 | LC/SFP, Single-Mode, 10km , 1310nm | SFP-S40 | LC/SFP, Single-Mode, 40km , 1310nm |
- - - -

?