Plastics & Products

PTFE/Teflon rod can be made by extruded and molded techniques, so both extruded PTFE (teflon) rod and molded PTFE (teflon) rod can be offered. Meanwhile, we can use virgin, recycled or mixed PTFE material to make PTFE rod as your requirements.

Extruded teflon PTFE rod can be used as lining, seal components, wire isolation, slide block, gasket, seal, dielectric material and so on.

Remarks:
We can also produce PTFE/Teflon rod in other diameters and lengths according to customers& acute; requirements.
Specification:

Diameter(mm) Length(mm)
Nominal Tolerance Nominal Tolerance
5,6 +0.480 100 +5.0
7,8,9 +0.580 100 +5.0
10,13,15,16,18 +1.100 100,1000 +3.60
20,25,30 +1.130 100,1000 +3.60
35,40,45,50 +1.600 100,1000 +3.60
55,60,65,70,75,80,85,90,100 +2.000 100,1000 +2.50
110,120,150,200 +2.500 100,1000 +2.50

Properties：
Item Data
Apparent density 2.10-2.30 g/ cm3
Tensile Strength ≥14 Mpa
Elongation at break ≥140%
Working Temp -180~260℃
Melting point 330℃
Produce Max.Temp 390℃
Compressive strength 1% deformation 400-500%
Hardness 50-60 shored
Water absorption 0.01%

Application：
1 Chemistry industry: used in sealing, pipeline, pipe fitting and high pure agentia household utensils etc.
2. Machine: used in piston ring, guide ring, machine tool guideways etc.
3. Electrical and Electronic Engineering: used in electric wire, electric cable, electrical condenser film, insulation board etc.
4. Construction: use as bridge, tunnel, large-scale chemical industry pipeline, storage tank supporting bearing slipper.
5. Light textile and other industry: PTFE product have nonstick properties, used in spinning, papermaking, foodstuff, rubber, ceramics etc.