Materials Handling

LD700 Shot Blaster?Machine For Small Castings Forgings Stampings 1. Function # Metal castings surface sand removing and cleaning
# Black metal work-pieces surface rust removing and cleaning
# Stampings surface and sharp edges smoothing
# Forgings and heat-treatment work-pieces burrs removing
# Springs and gears surface descaling
# Surface particle refining and reinforcement

2. Application Field
# Casting, heat-treatment, motor making, machine accessory making, bicycle parts making,

? ? ? ? ? auto parts making, non-ferrous metal die-casting, etc.
# Former process for metal work-pieces surface blackening, blueing, passivation
# Good base process for electroplating and painting
3. Main Components? # Material loading crane
# Blasting assembly
# Cleaning room
# Crawler device
# Splitter
# Hoister for splitter
# Dust collector
# PLC electrical control system
4. Working principle # Reducer drives the loading?crane to load the work-piece hopper and sends?the work-pieces
? ? ? ? ? into the cleaning room. # The shots from impeller head blasts on the work-pieces in the cleaning room?for cleaning and
? ? ? ? ? reinforcement. # The shots and waste sands goes into the hoister and be sent to?the splitter for separating.
# The splitted clean shots goes into the impeller head for work again.
# The?waste sands goes out from waste pipe and for reuse.
# The dust sucked by blower to dust collector,?filtering clean air out and dust to the dust
? ? ? ? ? collecting box which can be cleaned regularly. 5. Main Parameters?
- - - -
Description ? ? ? ? ? ?? | LD700 Shot Blaster Machine For?Small Castings Forgings Stampings |
Model No. | LD700 |
Total Dimension | 1300*1500*3200 MM |
Impeller Head Power | 10 HP (7.5 KW) |
Shots Sending | 360 KGS/MIN |
Impeller RPM | 3200 R/MIN |
Shots Intitial Speed | 78 M/S |
Working Box Pad Dia. | 700 MM |
Working Capability Per Time | ≤300 KG |
Crawler Crane Loading Capability ? ? ? ? | ≤800 KG |
Total Power | 10.5 KW |
Electrical Controlling | PLC (Delta) |
- - - -

?

6. Features & Advantaes of Our Shot Blaster?Machine
# Taiwan technology
# Core components all sourced from Taiwan.
# 3-5 times of lifespan than nomal shot blasting machine.
# Use Taiwan high wear-resistance?impeller head, wear-resistant parts can be used for 1500-
? ? ? ? ? 2500 hours. # Main shoting room use?high wear &?blasting?resistant?steel guard plate,?high chromium
? ? ? ? ? molybdenum?alloy?with 26.5-28% chromium. Lifespan 2-3 years. # Vice shoting room use high Mn alloy steel guard plate, lifespan 10 years.
# Belt use recently developed Taiwan?high wear-resistance rubber?belt?with reinforcing steel
? ? ? ? ? wire layer, no joint. Lifespan 2 years. # Every import transmission parts have proximity switches?to avoid further work when there is
? ? ? ? ? any fault. # Pulse bag dust collector collecting bag and electro-magnetic pulse valve from Taiwan.
# Winnowing splitter?inside special design give 99% splitting rate. Pneumatic controller controls?

? ? ? ? ? shots uniform flow, avoiding?too much shots destroy?motor or too less shots cant work well.
# Conveyor?and helix power adopt Taiwan Chengbang reducer. Conveyor lifespan 2 years,

? ? ? ? ? helix?lifespan 7200 hours.
# PLC electrical control system.
7. Photos
?

????

?