Fiber Optic Equipment

10/100Mbps PoE-PSE Fiber to Copper Ethernet?Switch: 1 SFP + 4 PoE ? Model: LNK-1400P-SFP Series
Overview

LNK-1400P-SFP Series 10/100Mbps copper to fiber switch provides IEEE 802.3af/at Power Sourcing Ethernet (PSE) functionality on the 4 twisted pair ports, supplying both data and electric current to devices such as WiFi access points, VoIP phones and IP security cameras.

?

It is an ideal solution when PoE-powered network devices need to be installed further than the 100 m / 300 ft. LNK-1400P-SFP supports 100M Ethernet Port and 100M SFP Port. The Ethernet port supports both half-duplex and full-duplex mode. Users can use different type of SFP modules (single-mode/multi-mode fiber, 1/2 core) as needed.

?

Features

· 1 x 100BASE-SFP fiber port

· 4 x 10/100Base-TX port for data and power

· IEEE802.3af (15.4W) or IEEE802.3at PoE+(30W) compliant

· Internal 100-240VAC universal power supply

· Diagnostic and unit LEDs and PoE current indicator LEDs

?

Application



?

?

?

Technical Indexes

- - - -
Standard | IEEE802.3 (10BASE-T), IEEE802.3u 100BASE-TX/FX (Fast-Ethernet), IEEE802.3x (Flow Control), IEEE802.1q, IEEE802.1p QoS, IEEE802.1d Spanning Tree, IEEE802.3af Power over Ethernet, IEEE802.3at Power over Ethernet |
10/100BASE-T | STP or UTP Category 5/5e/6 cable (Max. 100m) |
100BASE-FX | Depending on SFP |
Conversion Mode / Delay Time | Store-and-Forward < 10us, straight-through<0.9us |
Flow control | Full duplex-flow control, Half duplex-back pressure |
RJ-45 Port | 4 x Auto-MDI/MDIX |
Optical Port | 1 x SFP 100BASE-FX |
Input Voltage | AC100 ~ 240V / 50-60HZ to 48V via external adapter |
Power Consumption | <2.5W (idle), 60W (full-load) |
PoE Pin Assignment | 4/5 (V+),7/8 (V-) |
PoE Output Voltage | -48V, 0.27A, 13W |
MTBF | 50,000 hours |
BER | <1/1000000000 |
MAC Address Table | 1K |
Buffer Size | 1M |
Operation Temperature | 0℃~50℃ |
Storage Temperature | -40℃~70℃ |
Storage Humidity | 158mm ×100mm ×27mm |
Dimensions and Weight | 0.78 kg (Gross Weight) |
- - - -

?

Ordering Information

- - - -
Model | Description |
LNK-1400P-SFP | 10/100Mbps PoE-PSE Fiber to Copper Ethernet Switch: 1 SFP + 4 PoE, not including SFP Modules; 220VAC in -48VDC out, IEEE802.3af, PoE Power: 15.4W per PoE port, External Power Adapter |
LNK-1400PT-SFP | 10/100Mbps PoE-PSE Fiber to Copper Ethernet Switch: 1 SFP + 4 PoE, not including SFP Modules; 220VAC in -48VDC out, IEEE802.3at, PoE+ Power: 25.5W per PoE port, External Power Adapter |
- - - -

?

?

?