Metal Mineral
Description
Din Standard Cemented Carbide Rods Chamfered, made by 0.4, 0.6 micron TC powder?
?
Description:?
?
Cemented carbide rod is also known as tungsten carbide rod, hard alloy rod, hard metal rod. It is an alloy material consists of a hard refractory metal compound and bonding metal by powder metallurgy process.?
Our carbide rods are sintered by vacuum HIP furnace so that we can guarantee products are with uniform microstructure and high transverse rupture strength.
?
The rods offered by us are widely known for their features like excellent hardness, transverse rupture strength, durability.
?
Our solid carbide bars can be offered in various sizes. Apart from abundant DIN standard specification in stock, we also accept custom order.?
?
Tungsten carbide rods share excellent hardness, wear resistance, transverse rupture strength so it is popular raw material for making carbide cutting tools.
?
?
Parameters: ?
- - - -
Jinlei Grade | ISO-range | Chemical data | Physical data |
WC incl. Doping (%) | Co (%) | Grain Size (μm) | Hardness (HRA) | TRS (Mpa) | Density (g/cm3) |
HF06 | K10 | 94 | 6 | 0.4 | 93.5-93.8 | >3200 | 14.8 |
HF30 | K30-K40 | 90 | 10 | 0.6 | 92-92.3 | ≥3800 | 14.37 |
HF25 | K40-K50 | 88 | 12 | 0.4 | 92.3-92.5 | ≥3800 | 14.17 |
- - - -
? ? Specifications: ?
?
Solid?rods-?cut?to?length(Metric):
?
- - - -
D ground | L | D ground | L | D ground | L |
h6 (mm) | Tol. (+1.5mm) | h6 (mm) | Tol. (+1.5mm) | h6 (mm) | Tol. (+1.5mm) |
2.0 | 32 | 8.0 | 44 | 12.0 | 84 |
3.0 | 32 | 8.0 | 56 | 12.0 | 101 |
3.0 | 38 | 8.0 | 59 | 12.0 | 151 |
3.0 | 39 | 8.0 | 62 | 14.0 | 59 |
3.0 | 47 | 8.0 | 64 | 14.0 | 76 |
3.0 | 52 | 8.0 | 76 | 14.0 | 84 |
3.0 | 76 | 8.0 | 101 | 14.0 | 151 |
4.0 | 32 | 9.0 | 62 | 16.0 | 63 |
4.0 | 40 | 9.0 | 69 | 16.0 | 75 |
4.0 | 51 | 10.0 | 49 | 16.0 | 77 |
4.0 | 59 | 10.0 | 51 | 16.0 | 83 |
4.0 | 63 | 10.0 | 56 | 16.0 | 93 |
4.0 | 67 | 10.0 | 67 | 16.0 | 151 |
4.0 | 76 | 10.0 | 71 | 18.0 | 85 |
5.0 | 51 | 10.0 | 73 | 18.0 | 93 |
6.0 | 37 | 10.0 | 77 | 18.0 | 101 |
6.0 | 39 | 10.0 | 101 | 18.0 | 151 |
6.0 | 40 | 11.0 | 72 | 20.0 | 76 |
6.0 | 46 | 11.0 | 85 | 20.0 | 93 |
6.0 | 51 | 12.0 | 56 | 20.0 | 100 |
6.0 | 55 | 12.0 | 70 | 20.0 | 102 |
6.0 | 58 | 12.0 | 72 | 20.0 | 105 |
6.0 | 76 | 12.0 | 74 | 20.0 | 151 |
- - - -
?
?
Areas?of?Application:
?
Tungsten carbide rods are developed for making carbide cutting tools with its high wear-resistance at high temperatures. In this case, tungsten carbide rods are mainly used to make carbide end mills and drill bits. Below are some details.
?
- - - -
Jinlei Grade | ISO Grade | Application |
HF06 | ? K10 ? | Grey cast iron, unalloyed steel |
HF30 | K30-K40 | Non ferrous metal, stainless steel, low alloyed steel?cutting |
HF25 | K40-K50 | ? High alloyed steel, stainless steel ? |
- - - -
?
?
?
?
?
?
?
?
?
?
?
?
?
Advantage:
?
Cemented carbide consists of natural hard and stable phase, and practically doesn’t lose any level of its high hardness when heating up. Therefore, high speed steel cannot substitute tungsten carbide, as the high hardness of HSS is only in a result of quenching process during which hard phase nucleates & grows and it breaks down when annealing. ? ?
?
Quality can be taken for granted, as we produce tungsten powder, tungsten carbide powder with?11 years?experience so material’s quality is for sure guaranteed and?every pre-process for making solid rods is clearly monitored. Consequently, the quality of solid TC rods is guaranteed to be high and stable.?
Read More
Jiangsu Hetian Technological Material Co., Ltd.
Tungsten Carbide Rod
Address: No.295, Qianluo Village, Dingshu Town, Yixing City, Jiangsu Province, China,
Wuxi, Jiangsu
China, 214000
Tel: 86-510-87490565
Fax: 86-510-87490565
