Air-compressing & Air-separation

Share us

Heat Pipe Vacuum Tube Solar Water Heater With Silver Fluorocarbon Plate

ILCP-5818G470C-24T

Description

Compact Pressure Silver Fluorocarbon Plate Heat Pipe Solar Water Heater 24tubes with 25degree bracket

?

- - - -
Heat Pipe Vacuum Tube | Glass Tube | Φ58*1800mm three-target coat SS-AL-N/CU |
Heat-conduction | Copper heat pipe tube wrapped with aluminum |
Tube Qty | 10 tubes to 36 tubes |
Water Tank | Capacity | 90L - 300L |
Inner tank | Stainless steel SUS304-2B or SUS316L |
Insulation | Integral high-density polyurethane foam |
Tank shell | High-quality?silver fluorocarbon (PVDF) plate |
Bracket | Material | Aluminum alloy 1.2mm |
Tilt angle | 25°- 50° according to local latitude |
Optional Device | Electrical heater, T/P valve, Safety valve, Anode magnesium |
Water Output | 45-95oC according to local solar irradiation and duration |
Working Pressure | 6.0 bar |
Hail Resistance | Φ25mm |
Wind Resistance | 140 km/h |
- - - -

?

?

Compact Pressure Silver Fluorocarbon Plate Heat Pipe Solar Water Heater 24tubes with 25degree bracket?working principle


1.The solar heater tank has no exhaust hole, therefore, it must bear the pressure came from tap water and hot water,when use, the hot water comes out because of water pressure.
2.Vacuum tube absorbs solar energy, and conductive copper pipe transfers the heat into the pressurized solar water heater tank. In this case, the water inside the tank becomes hot
3.No water in the heat pipe makes the whole system could bear pressure



?

Description

?

1) Inner tank material: SUS304-2B stainless steel. Available thickness is 1.2-1.5mm.
2) Outer tank material: Silver fluorocarbon (PVDF) plate 0.4MM
3) Heat pipe Vacuum tube: 58x1800mm
Material: High borosilicate glass, three-layer coated vacuum tube.
Over 15 years service life. Hail resistance: 25mm.
4) Insulation layer: High density polyurethane foam, available thickness is 50-60mm.
5) Very popular tank capacity in present markets is 150-300L.
6) Frame material: Aluminum alloy 1.2mm,?universal bracket suitable for slope and flat roof installation

?



?

Applications:

Domestic hot water for shower, washing

?

Competitive Advantage:

1.Adopts the best conduction performance metal- heat pipe (copper)
2.Can be used all year round in the cold climate
3.High efficiency, rapid warming. Heat pipe in vacuum tube could transfer hot energy to cold water in pressurized solar water heater tank rapidly
4.The whole pressure of the system is up to 1.5kg/M2, the inlet could connect the tap water directly, the max pressure can be 0.6Mpa
5.No water in the tube, one tube broken don& acute;t influence the system working
6.The design for inner tank is reasonable and scientific, which could hold 100, 000 times fatigue test without any damage
7.Dual-purpose brackets for both flat and inclined roof
8.The system is pressurized,it keep a constant temperature of water in the tank, avoid the problem came from water level controller malfunction which could cause water flow out

cheap prodocuts, china suppliers,

Read More

Previous

Compact Pressurized Stainless Steel Heat Pipe Solar Water Heaters 20 Tubes for Slope Roof...

Previous

24 Tubes Pressurized Solar Water Heater 25 Degree Angel , 0.6 Mpa Max Pressure...

Haining Yinuo Electric Co.Ltd

Solar Heater Collector,Non Pressurized Solar Water Heater,Pressurized Solar Water Heater

Address: No.20, Zhangmumiao, Zhongle Village, Xieqiao Town,
Jiaxing, Zhejiang
China, 314000

Tel: 86-573-87706600
Fax: 86-573-87218666

H5响应式定制设计
26种语言,SEO营销型网站


H5/响应式/营销型企业网站; 26种语言扩展;
覆盖: 英文、法语、德语、西班牙语、葡萄牙语、俄语、阿拉伯语、波斯语、日语、韩语
了解更多