Fiber Optic Equipment
Description
SFP-1.25G-T Copper Small Form Pluggable (SFP)transceivers is high performance, cost effective module compliant with the Gigabit Ethernet and 1000BASE-T standards as specified in IEEE 802. 3-2002 and IEEE 802.3ab, which supporting 1000Mbps data- rate up to 100 meters reach over unshielded twisted-pair category 5 cables.
The module supports1000 Mbps full duplex data-links with 5-level Pulse Amplitude Modulation(PAM) signals. All four pairs in the cable are used with symbol rate at 250Mbps on each pair. The module provides standard serial ID information compliant with SFP MSA, which can be accessed with address of A0h via the 2wire serial CMOS EEPROM protocol. The physical IC can also be accessed via 2wire serial bus at address ACh.
Feature
Compliant with MSA SFP specification
Compliant with IEEE 802.3 1000BASE-T specification
Supports 1000BASE-X without clock with 1000BASE-X auto-negotiation to copper
Hot-pluggable
Metal enclosure for lower EMI
Compatible with CAT 5 cable in excess of 100M in length
+3.3V Single power supply
Compact RJ-45 connector assembly
SFP 1000BASE-X Auto Negotiation Bypass Mode
With 9/125 μm single mode fiber (SMF)
Operate data rate:1.25Gb/s;
operate temperature Standard :0 to +70°C
Complies with RoHS directive
Application
Fiber Channel
Gigabit Ethernet
Switches
Routers
Hubs
Read More
Reach Optics Co.,Limited
Reachoptics, SFP Transceiver, SFP+ Transceiver, XFP Transceiver, CWDM SFP, DWDM XFP, CWDM SFP+, DWDM SFP+, Xenpak, X2 Transceiver, Media Converter, CWDM/DWDM/WDM/OADM Mux Demux
Address: 3F,Jiali Technology Bldg, Longsheng West Road 88, Longhua,
Shenzhen, Guangdong
China, 518109
Tel: 0086015013716218
Fax: 0086075561334798
