Cast & Forged

Share us

Multi Function PVC Pipe Extrusion Machine With Siemens Motor ABB Inverter

KPM

Description

?
? 50-160mm multy function pvc pipe extrusion machine with SIEMENS motor ABB inverter ? ? 1,?pvc pipe extrusion machine production flow ? Raw material+agency----------mixing---loader-----force feeding-------extrusion------------extrusion mould—vacuum forming tank---spray cooling tank --haul-off---cutter----stacker ? 2,?pvc pipe extrusion machine each part machinery& acute;s function introduction ? (1), raw material mixing: is PVC stabilizers, plasticizers, antioxidants and other accessories, scale, technology has added into a high-speed mixer, the material and mechanical friction material from temperature to set the process temperature, and then the cold mixing machine material to 40-50 degrees; this can be added to the extruder hopper. (2), The extruder portion: the machine equipped with a quantitative feeding device, so that the extrusion amount and feeding amount can be matched, to ensure that the products stable extrusion. Due to the characteristics of conical screw, a feeding section having a larger diameter, the material heat transfer area and the shear velocity is relatively large, is conducive to the plastics materials in metering section of screw, small diameter, reducing the heat transfer area and on the shear rate of melt, the melt at lower temperatures and extrusion. Screw in the barrel rotates, the PVC mixture plasticizing to head, thereby achieving compaction, melting, mixing and homogenizing; exhaust gas, dehydration of. The feeding device and a screw drive device with variable frequency speed control, can realize the synchronous speed control. ? (3), Extrusion die head part : by compaction, melting, mixing of PVC, with follow-up materials by the screw to die, extrusion die head is the key part of the pipe forming ? (4), ?Vacuum shaping water tank for pipes, cooling stereotypes, stereotypes water tank is provided with a vacuum for shaping and cooling of the vacuum system and a water circulating system, stainless steel tank, circulating water spray cooling, vacuum shaping water tank is provided with a mobile device, and left and right height regulating manual device. ? (5), hauling machine for continuously, automatically and is cooled to harden the pipes from the head out, variable frequency speed regulation ? (6), Cutting machine: by the travel switch according to the length required control, automatic cutting, and delay over the frame, implementation of water production, cutting machine with permanent switch signal for instruction, complete the cutting process, the cutting process and pipe running to maintain synchronization, cutting process by the electric and pneumatic drive, cutting machine is provided with a dust suction device, the cutting chips produced by timely aspirate, and recovery ? (7), stacker: material turning movement from the cylinder through the gas path control to achieve erection, turning a limit device, when the cutting saw to cut the pipe, pipe to transport, after time delay, the cylinder into the work, realize the turning action, reach the discharging purpose. After unloading, the delay of several seconds automatic reset, waiting for the next cycle.


?
3. pvc pipe extrusion machine machinery technical parameter

?

- - - -
extrusion machinery | SJZ65/132 conical double screw extruder |
pipe range | 50-160mm |
Main motor | 37KW |
Motor speed adjusting | 37KW ABB inverter |
vacuum and water pump | 5.5KW + 5.5kW |
hauling motor | 1.1KW*3pcs |
cutting motor | 1.5kw |
Area need | 24X2X2.8m |
- - - -

?

reference pictures:


?

?

Other Model pvc pipe extrusion?machine Main technical Date:

- - - -
Model | Pipe spec(mm) | Conical twin screw extruder | Max.output (kg/h) | Total power(kw) |
KPM63-PVC | Φ20-Φ63 | SJZ65/132 | 180-300 | 104 |
KPM160-PVC | Φ63-Φ160 | SJZ65/132 | 180-300 | 105 |
KPM250-PVC | Φ75-Φ250 | SJZ80/156 | 300-450 | 110 |
KPM315-PVC | Φ200-Φ315 | SJZ80/156 | 300-450 | 216 |
KPM450-PVC | Φ200-Φ450 | SJZ92/188 | 650-750 | 290 |
KPM630-PVC | Φ315-Φ630 | SJZ92/188 | 750-850 | 350 |
KPM800-PVC | Φ500-Φ800 | SJZ135/31 | 950-1100 | 410 |
- - - -


?
? want know more? pls feel free feedback to us. ? ?

cheap prodocuts, china suppliers,

Read More

Previous

16 - 110mm PE / PVC Pipe Extrusion Line 25m/min MAX Production Speed...

Previous

150 - 200KG Output PVC Wall Panel Profile Extrusion Line With Siemens Motor ABB Inverter...

Zhangjiagang City Benk Machinery Co., Ltd.

PVC Pipe Extrusion Line,PVC Profile聽Extrusion Line,PVC Foam Board Extrusion Line

Address: Fuyuan Road Jinfeng Town, zhangjiagang City China.,
Wuxi, Jiangsu
China, 214000

Tel: 86-512-58901463
Fax: 86-512-58901341

H5响应式定制设计
26种语言,SEO营销型网站


H5/响应式/营销型企业网站; 26种语言扩展;
覆盖: 英文、法语、德语、西班牙语、葡萄牙语、俄语、阿拉伯语、波斯语、日语、韩语
了解更多