Fishing
Description
?
?Floating pneumatic sling type marine rubber fender for mooring
?
All our pneumatic marine?rubber fenders are manufactured and tested in accordance with ISO17357:2002.
?
marine ?rubber ?fender?Description:
?
Pneumatic fenders can be delivered in various sizes and types. Chain and tyre net (CTN) type is usually recommended to protect the fender body, but sling type or body only is also available.
?
Our pneumatic rubber fenders consist of 3 main layers: Inner Rubber, Reinforced Tyre Cord and Outer Rubber. The above layers are mould-vulcanized as one body under high pressure after they have been assembled. Each fender is pressure tested and checked according to ISO 17357 before it is shipped to our customers.
?
?
marine ?rubber ?fender?Specifications and sizes :
?
The?guaranteed?energy?absorption?of?marine?rubber?fenders?are?the?energy?absorption?at?60%?deflection.?This?value?can?be?use?in?engineering?design?and?actual?operation.?Table?gives?the?sizes,?weights?and?technical?performance?of pneumatic marine rubber fenders.
?
- - - -
Nominal?size (DxL)meter | Initial?internal?pressure?Po=0.05Mpa | Initial?internal?pressure?Po=0.08Mpa |
Load (kg) | R (KN) | Energy (KJ) | Load (kg) | R (KN) | Energy (KJ) |
0.5x1.0 | 25 | 64 | 6 | 25 | 83 | 8 |
0.6x1.0 | 32 | 74 | 8 | 32 | 96 | 11 |
0.7x1.5 | 50 | 137 | 17 | 50 | 178 | 24 |
1.0x1.5 | 80 | 182 | 32 | 80 | 235 | 44 |
1.0x2.0 | 100 | 257 | 45 | 125 | 335 | 63 |
1.2x2.0 | 120 | 297 | 63 | 165 | 386 | 86 |
1.35x2.5 | 165 | 427 | 102 | 226 | 554 | 140 |
1.5x3.0 | 315 | 597 | 153 | 370 | 751 | 211 |
1.7x3.0 | 405 | 639 | 191 | 436 | 830 | 263 |
2.0x3.5 | 590 | 875 | 308 | 632 | 1138 | 424 |
2.5x4.0 | 1050 | 1381 | 663 | 1110 | 1815 | 925 |
2.5x5.5 | 1333 | 2019 | 943 | 1410 | 2653 | 1317 |
3.0x5.0 | 1880 | 2104 | 1210 | 2155 | 2700 | 1571 |
3.0x6.0 | 2160 | 2583 | 1485 | 2470 | 3292 | 1888 |
3.3x4.5 | 2020 | 1884 | 1175 | 2300 | 2476 | 1640 |
3.3x6.0 | 2300 | 2783 | 1675 | 2600 | 3652 | 2338 |
3.3x6.5 | 2700 | 3015 | 1814 | 3080 | 3961 | 2532 |
- - - -
?
?
Floating Marine?Pneumatic Rubber Fender Storage?
An unused fender can be well-maintained for a long time if stored in the clear, dry and airy place. The store must be cool, dark and with good ventilation. The pneumatic fenders must be kept away from hot condition. Keep them away from acid, alkali, grease and organic solution. Avoid putting heavy loads on the pneumatic fenders. Keep all fenders individually spaced.?
Please keep the pneumatic fenders inflated when storage,we don& acute;t suggest to keep the fenders deflated for more than two months.?
?
Major?Strengths?Of?Our?marine ?rubber ?fender:
?
1.?High?safety?level
?
2. ?Easy?maintenance
?
3.?Low?transportation?cost
?
4. Long?lifespan ?
?
Floating Pneumatic Marine?Rubber Fender Maintenances?
1)Periodically check the pneumatic fender against damages and pressure variation and replace the air valve core once every six months.?
2) If the pneumatic fender ties with wire rope, the wire rope must be cased with rubber sleeves to avoid the fender stabbed by wire.?
3) There must be none of sharp or projecting thing on the surface in which the pneumatic fenders contact to avoid the fender from being damaged.?
?
?
Our?marine ?rubber ?fender
?
Founded in 2003, Nanhai Airbag is a full-service provider of airbags and pneumatic fenders, covering R&D, manufacture and distribution. Our airbag products are used for ship launching, buoyancy, and heavy lifting and moving with remarkable advantages over traditional steel-based methods.?
?
?
?
?
?
Any questions please feel free to contact me at any time.?
Website:www.airbag.cc ?www.nanhaiairbag.com?
Tell:+86 0531 58775198
?
Email:sales@airbag.cc
?
?
?
?
Read More
Shandong Nanhai Airbag Engineering Co., Ltd.
Pneumatic Fender,Yokohama Fender,Ship Launching Airbag
Address: 59 Gongye Road South, Room 403, Building No. 2, China Railway Fortune Center, Jinan City, Shandong Province, China,
Jinan, Shandong
China, 250000
Tel: 86-531-58775198
Fax: 86-531-58775188
