Pump & Vacuum Equipment

Share us

Jet Garden Pump

GPxxx-1

Description

WORKING PRINCIPLE
The series SELF-PRIMING CENTRIFUGAL PUMPS,Self-priming is achieved using an ejetor,housed in the pump body,The total delivery produced by the closed centrifugal impeller is sent only partly to the delivery opening.The remaining water is recirculated through the ejector,which is connected to the suction chamber and generates the necessary vacuum to self-prime the pump.When first staring the pump fill the pump body with water,without bothering to fill the suction piping and eliminate any air pockets.When the pump is started up the water in the pump body circulates through the ejector and transfers any air from the suction to the delivery chamber,expelling it through the delivery piping.At the same time the vacuum thus generated causes water to rise in the suction piping,thus self-priming the pump.Since the self-priming system operates continuously,these pumps are practically unaffected even by the presence of large amounts of entrained air in the fluid being pumped.

Water Pump, Garden Pump,

Read More

Previous

Garden Jet Pump...

Previous

Garden Jet Pump with Digital Switch...

Ningbo Hollystar Machinery Co.,Ltd. ( Pumps )

Water Pump, Centrifugal Pump, Vortex Pump

Address: 312-313Room,Kingrin Building,Yinzhou,
Ningbo, Zhejiang
China, 315040

Tel: 0086-574-87065037
Fax: 0086-574-87065026

H5响应式定制设计
26种语言,SEO营销型网站


H5/响应式/营销型企业网站; 26种语言扩展;
覆盖: 英文、法语、德语、西班牙语、葡萄牙语、俄语、阿拉伯语、波斯语、日语、韩语
了解更多