Industrial Washing Machine
Description
20L bucket fast cycle Plastic Injection Moulding Machine power saving
Cycle time for 20L bucket body is 18-30sec?
Machine using fast cycle and fully automatic
T-slot makes the adjustment easier, compare with the screw adjustment, it has better adaptability and longer life-span
Optional function
# # nitrogen injection devices
# technological meter device for plasticizing speed indication
# prolonged nozzle
# hydraulic safety interlock
# core pull and unscrew motor
# robot interface
# special screw
# Be-clear at one glance for checking the chiller water speed and temp
# Auto-loader
# Hopper dryer
# Chiller
# Mixer
# Crusher
# Cooling tower
?
COMPONENT
?
- - - -
COMPONENT | BRAND&ORIGINAL | ? |
hydraulic?system | Servo |
hydraulic?motor | INTERMOT-ITALY-CHINA | ● |
servo?motor?control?system | HUICHUAN/PHASE-CHINA | ● |
hydraulic?pump | fixed?Pump | VICKERS?OR?YUKEN | / |
gear?pump | SUMITOMO-JAPAN | ● |
hydraulic?direction?valve | NORTHMAN-TAIWAN | ● |
propotional?flow?control?valve&propotiona l?pressure?control?valve | HNC-TAIWAN?FOR?BIG?MACHINE, SMALL?MACHINE?USE?DONGFENG-CHINA | / |
mould?adjust?hydraulic?motor | INTERMOT-CHINA? | ● |
hydraulic?safety?valve | NORTHMAN-TAIWAN | ?● |
electric?system | ? |
computer/controller | TECHMATION-TAIWAN | ● |
relay | SCHNEIDER-GERMANY | ● |
main?switch | LS-KOREA | ● |
linear?transducer | GEFRAN-ITALY | ● |
limited?switch | PANASONIC-JAPAN | ● |
breaker | CHENTAI-CHINA | ?● |
electric?motor | ZHONGDA-CHINA | / |
others | ? |
?High?pressure?hydraulic?pipe | GOODYEAR-USA | ● |
seals | VALQUA-JAPAN | ● |
pressure?meter | Tecsis-USA | ● |
automatic?lubrication? | SL-CHINA | ● |
screw? | JINGXING-CHINA?38CrMoAlA | ● |
- - - -
?
Detailed Product Description
?
Injection molding machine adapt the fast & reliable linear motion, equiped with servo control energy saving system, with our experienced technology,we are dedicated to provide the best solutions for the precise injection products for you!
?
SPECIFICATION?
?
- - - -
?SPECIFICATION? | M-560 |
ITEM | A | B | C | D |
??INJECTION??UNIT | ? |
?????????SCREW??DIAMETER | mm | 75 | 80 | 85 | 90 |
??????SCREW??L/D??RATIO | L/D | 23 | 22 | 21 | 19.5 |
???SHOT??VOLUME(THEORETICAL) | ? | 1811 | 2061 | 2327 | 2608 |
??????????INJECTION??WEIGHT(PS) | g | 1666 | 1896 | 2140 | 2400 |
??????????INJECTION??PRESSURE | Mpa | 190 | 168 | 148 | 132 |
??????????INJECTION??RATE | g/sec | 306 | 348 | 393 | 441 |
?????????SCREW??SPEED | rpm | 160 |
CLAMPING?UNIT | ? |
?????????????CLAMP??TONNAGE | KN | 5600 |
??????????TOGGLE??STROKE | mm | 780 |
??????????MIN.MOLD??HEIGHT | mm | 300 |
??????????MAX.MOLD??HEIGHT | mm | 820 |
??????SPACE??BETWEEN??TIE??BARS | mm | 830X780 |
?????????????EJECTOR??TONNAGE | KN | 120 |
??????????EJECTOR??STROKE | mm | 230 |
?????EJECTOR??NUMBER | PC | 13 |
OTHERS | ? |
??MAX.PUMP??PRESSURE? | Mpa | 16 |
?????????HEATER??POWER | KW | 32 |
???PUMP?MOTOR??POWER | KW | 45 |
?????????OIL??TANK?CUBAGE | L | 700 |
?????????MACHINE??DIMENSION(LxWxH) | M | 8.15X1.95X2.5 |
??????????MACHINE??WEIGHT | T | 17.5 |
- - - -
?
?
Selling?points
?
Double oil tank design:because short the distance for the oil return line ,the hydraulic system response is getting more quicker. In the meantime,this design will reduce the oil temperaure ,protect the oil seal.
Using bridge design for the injection unit,avoid material leakage if the injection unit is not stay in the same level.
Adopt double injection cylinder ,more faster and powerful.avoid any injection less or injection not in the center by single injection cylinder
Screw barrel material using top 3 supplier in China
Offer 2 hydraulic core pull in the valve panel for future installation Products collection hopper can be dis-assembled and install convenyor in future Install the linear transducer for clamping near the crossing,not easy to get damaged by clearning or maintaiance.
?
Platen drawing
?
?
?
?
Read More
VAINO INTERNATIONAL LIMITED
HDPE Blow Molding Machine,Extrusion Blow Molding Machine,Automatic Blow Molding Machine
Address: Room1315,B# Ningbo Chamber Of Commerce Building,No.588 Tiantong South Road,Yinzhou District,Ningbo,China,
Ningbo, Zhejiang
China, 315000
Tel: 86-574-88054805
Fax: 86-574-88054565
