Non-metallic Mineral Deposit

Share us

ASME SA214 Welded Carbon Steel Heat Exchanger Tubes Round Shape

ASME SA214 Welded

Description

ASME SA214 Welded carbon steel heat exchanger tubes

?

Standard: ASTM A214 / ASME SA214

Steel grade: Low carbon steel

Material shall conform to the applicable requirements of specification A450/A450M

- - - -
Carbon, max, % | 0.18 |
Manganese, % | 0.27-0.63 |
Phosphorous, max. % | 0.035 |
Sulfur, max, % | 0.035 |
- - - -

Process: Welded and cold drawn

The tubes cover minimum wall thickness.

Application: tubular heat exchangers, condensers, and other heat transfer apparatus

?

Dimensional range:

OD: 19.05-76.2mm

Any specific size is to be discussed before offer

?

The tube be 100% eddy current tested

Ultrasonic test is as option

Straightness ≤1mm/1000mm

Roughness: Ra ≤0.8

?

Heat treatment

After welding, all tubes shall be heat treated at a temperature not less than 900℃ and followed by cooling in air or in the cooling chamber of a controlled atmosphere furnace. Cold drawn tubes shall be heat treated after the final cold drawing pass at a temperature not less than 650℃

?

Test
# The tubes shall have a hardness test, it is not exceeding 72HRB.
# One flattening test shall be made on specimens from each of two tubes from each lot or fraction thereof.
# One flaring test shall be made on specimens from each of two tubes from each lot or fraction thereof.
# One reverse flattening test shall be made on a specimen from each 450m of finished tubing.
# Brinell or Rockwell hardness tests shall be made on specimens from two tubes from each lot.(when the final heat treatment is in a continuous furnace, a lot shall include all tubes of the same size and heat, heat treated in the same furnace at the same temperature, time at heat, and furnace speed)
# Each tube shall be subjected to the hydrostatic test or the nondestructive electric test. The client may specify which test is to be used.

?

Surface quality

The finished tubes shall be free of scale. A slight amount of oxidation shall not be considered as scale.

?

Mechanical properties

- - - -
Tensile strength, min, ksi (MPa) | 47 (325) |
Yield strength, min, ksi (MPa) | 26 (180) |
Elongation in 50mm, min, % | 35 |
- - - -

?

Tubes shall be delivered with square cut ends. The ends are free of excessive burrs.

The tubes are bundled in the waterproof plastic sheet and packed in the wooden cases

The case is most suitable for hanging by forklift.

EN10204-3.1 MTC shall be issued

EN10204-3.2 MTC is as option

?

cheap prodocuts, china suppliers,

Read More

Previous

Alloy Steel Boiler, Superheater Heat Exchanger Tubes Seamless ASME SA213...

Previous

ASME SA192 Seamless carbon steel Boiler Steel Tubes for high pressure service...

Zhangjiagang Bonded Area Henglong Steel Tube Company

Precision Steel Tubing,Heat Exchanger Tubes,Mechanical Steel Tubing

Address: No.5, Taiwan Road, Zhangjiagang Bonded Area, Zhangjiagang City, Jiangsu Province, China,
Zhangjiagang, Jiangsu
China, 215600

Tel: 86-512-58328328
Fax: 86-512-58328332

H5响应式定制设计
26种语言,SEO营销型网站


H5/响应式/营销型企业网站; 26种语言扩展;
覆盖: 英文、法语、德语、西班牙语、葡萄牙语、俄语、阿拉伯语、波斯语、日语、韩语
了解更多